DIY Craftsman Window Trim
This easy craftsman style trim requires NO confusing angled cuts, so it’s easy for anyone to do, even a beginner, and it makes a HUGE impact.
Don’t stop at window trim, make your own curtain rods, add window boxes outside, and even some wood shutters outside!
Hi, friends! It’s Lauren from Bless’er House, and I’m thrilled to be back sharing more DIY goodness from our latest house shenanigans.
If you’ve never visited my little corner of the web, my husband and I are on a mission to bring lots of character and charm to our very basic builder box house.
This time two years ago, our living room looked like this:
Since embarking on our home owning journey, we’ve discovered that the top three ways to transform a space in a huge way is with paint, long curtains, and architectural details.
We already tackled the paint and curtains part last year, and when we threw our DIY faux fireplace into the mix, the space suddenly looked 10 times bigger! But one thing it was missing in the character department, our trim-less builder grade windows- window trim.
So we decided it was time to fix that.
Craftsman-Style Window Trim Video Tutorial
Start here and watch how this project came together, then come back for more of a step by step craftsman window trim process. But remember this not only works on an interior window, but without the window sill this tutorial also works well for a trim out of a front door.
Can’t see the video? Get it on our YouTube channel here (and subscribe while you’re there 😉
Supplies List
(The below supplies are what you’ll need for one standard 35.5″ x 59.5″ window.)
- 1″x2″x8′ board
- 2- 1″x4″x8′ boards
- 1″×6″x8′ board
- 2-in brad nails
- Trim Head Screws (for wood)
- Wood glue (optional)
- Combination square tool
- Pencil
- Hammer or nail gun
- Drill
- White trim caulk
- Wood filler
- Fine grit sandpaper
- Paint (I used Sherwin Williams Pure White to match our fireplace and baseboards.)
- Jigsaw
- Circular saw or table saw
We had five windows to add trim to, so we had quite a bit more lumber than what is in that list. The best part though is this requires very elementary carpentry skills. Let your diyer days begin, because this is an excellent project if you’re a beginner at home improvement. No complicated angled cuts!
Trim Installation Tutorial and Instructions
Get this craftsman window trim look in your own home with these tips, tricks, and instructions.
Head Casings:
1 – We started out by building the header first and measured the top width of our window opening or window frame then added 10 inches to that measurement to allow for a 5 inch overhang of the trim pieces on each side of the window.
We marked that measurement on a 1″x6″ board using the square tool to mark a straight line.
Then, using our circular saw, we cut the 1″x6″ board.
We used the same measurement from our 1″x6″ to mark and cut two pieces of 1″x2″ boards. Since we had three windows clustered together to make one large window trim unit. We worked from a 12 foot length board.
Once the 1″x2″s were cut, we attached them to each side of the 1″x6″ board with wood screws (as shown below). You could run a bead of wood glue between the pieces too if desired. * Remember to avoid wood splitting it always helps to pre-drill the screw holes.
Our header had to be very long for our large window, and since we couldn’t find 1″x2″x12′ boards, we had to cut and attach our 1″x2″s in 6 pieces to the longer 1″x6″x12′ board.
Note: If you have access to a tablesaw, you could rip down the 1″x2″ boards from a larger single board that is the right length to avoid to many joints.
Then we had our header!
Once we centered our new header over the windows, we nailed them into place right through the drywall into the studs. We used a good ol’ fashioned hammer since the size of our nails wouldn’t work in our nail gun.
Window Sills
2 – Next section was the window sill. We worked on this larger window in thirds too. Your entire window sill should be the same length as your header was.
We marked the width we needed for the sill on another 1″x6″ board and cut using our circular saw.
Then, using the newly cut 1″x6 “board, we marked on the wall where the sill should end (using the same 5 inch overhang) and held up the board to mark the window’s edge.
We measured the window’s depth too.
We marked those two measurements (the window’s width and depth) on the 1″x6″ board.
Using our square tool again, we marked the straight lines between the measurements.
Then cut it out with a jigsaw.
After our cuts, here’s what our 1″x6″ board looked like.
We fit our newly cut 1″x6″ board into place and nailed it in to form our window sill. You could add a bit of construction adhesive if desired.
Side Casings:
3 – To make the sides of the window, we used 1″x4″ boards.
We just measured the height between the bottom of the header (from step 1) and the top of the sill (from step 2) to know at what length to cut the 1″x4″ board.
In working with our large window, the two sections in the middle of our three windows were a little wider than a 1″x4″ board at 4.74″. So we had to cut two 1″x6″ boards lengthwise to make them the exact width we needed.
We lined the sides up on the edge of the windows and nailed them into place.
Apron:
4 – For the last carpentry step, we added our apron (the wood piece underneath the window sill).
We measured the width from the outside edge of the 1″x4″ side piece to the other outside edge of the 1″x4″ side piece to find how long to cut the 1″x4″ board for the apron.
If you’re a visual person, this might help to show you how we built this trim style for our larger window.
Caulk, Patch and Sand
5 – Then caulk like crazy! Also known as a carpenter’s best friend.
Read tips for a perfect caulking job here and more tips (including a video) here.
Caulk all of the seams and fill the nail holes and knots with wood filler. Let dry and sand until smooth.
Paint or Stain
6 – Finally, paint all of your new trim. We did two coats of primer+paint in one.
After we put our curtains back up, I was amazed at the difference it made! It’s like our windows were destined for Craftsman style window trim all along.
Our windows look beautiful with our fireplace too. Very soon, we’ll be putting an area rug in here to make this space finished. And I hope to put beams on our ceiling eventually, but I might be pushing my luck there.
You can see more sources and DIYs from this room over on Bless’er House.
What do you think? Something you might attempt? Trimming out windows really is a big room changer. I can’t wait to tackle the rest of our upstairs windows with it.
Questions and Answers:
What is Craftsman Style Window Trim?
This is a style of window trim that was part of the Arts and Crafts movement. It originated in the early 1900’s. It was all about comfort, simplicity and natural materials. Sort of fighting against all the new fangled machine made items available at the time.
What is Craftsman molding?
It might be easier to look at this diagram of the main elements of Craftsman style trim to understand what craftsman style molding looks like and how to build it.
How Wide is Craftsman Trim?
This is entirely dependent on the look you are going for.
You can have wider headers than the side casings or apron if you like that. Or you could have a wide header and apron. Often what will determine the size of your molding is the materials available to you locally.
What material is used for window casings?
This really depends on the final look you are going for. Originally craftsman trim was often made of oak in a style called Mission oak that focused on simple vertical and horizontal lines. Hence the simplicity of the molding style.
Buying solid oak now has quite a high price tag, and the look of stained wood trim isn’t for everyone, so what are some other options?
Nowadays there are endless options of wood, from regular or select pine, like Lauren used, to poplar, maple, plastic moldings, to MDF that is readily available at most home improvement stores.
A word of caution in rainy climates you may want to avoid MDF as it is damaged easily by water (they do have a waterproof sheet good of MDF, but it is usually only available at specialty wood stores.
Painting trim is a great choice and if that is your goal, then any material you prefer should work well.
Be sure to pin this post for later:
More tips and ideas for DIY window trim jobs:
Start Caulking! Tips and Tricks, How to Add Trim to Arched Windows, More top tricks and tutorials for trimming windows: plus more tips and tricks for installing trim and molding.
Originally posted 1.23.2016 // Updated 2.26.2020 // Updated 1/12/23
Hi y'all! I'm Lauren from Bless'erHouse. I'm a builder grade subdivision house owner who dreams up outside-of-the-box ways to create a rustic industrial cottage on a budget. Between chasing my toddler and sweet talking my hubby into helping me with yet another project, you can usually find me with a paint brush in one hand and a big ol' glass of sweet tea in the other.
Love this room, like everything! What color and make us the paint?
Thank you, Cathy! The paint on the walls is Sherwin Williams Perfect Greige in a matte finish.
What color did you use for the room.
Definitely on my list for the 17 windows in this house. – love the tutorial!!!!
Thanks, Gina! It makes a WORLD of difference! We’ve finished 10 windows and have 4 left until they’re all done in our house. After you get the hang of it, you can knock out one window in about an hour. 🙂
Where did you purchase your light/fan for the living room? Do you remember about what the cost was?
We got it at Lowe’s a couple years ago for about $180 when they went on sale during the summer. It’s called Twin Breeze by Harbor Breeze. Hope that helps! 🙂
The room was pretty the way it was but now it looks terrific!
You guys did a beautiful job.
Because of this informative and easy tutorial, my husband requested a new table saw! Since I’m requesting this trim on our windows, I gave the green light. It’s a win, win! Thank you for making it a simple decision????
What type of wood did you use for the trim?
I already have a window sill, but no trim. I love this look. Any tips on how to go about this? I think I would need to remove the current window sill because it doesn’t stick out as far on the sides. Is it difficult to remove?
Hello!! Where did you get those curtains?? I’m looking for something similar for my living room makeover!!
Hmmm…I notice how your dog’s coloring ties in perfectly to the room decor. You really are a perfectionist!
Thanks for the perfect tutorial. All the pictures and explanations are so thorough. Although I like your curtains, it is almost a shame to cover it all up. We will definitely use this process as we work on our windows in our home remodel. It is something that we can successfully do. All the best…
love the windows! where did you get your blinds? they are perfect!
Just curious, but why did you not use MDF? Probably more labor in ripping the sheet but the finish is a lot easier, and the router works a little better with the MDF. (although you certainly could route the boards you used)
We just started our first window with this trim. We put wood filler over all our nail holes and it’s looking great, but how did you hide the wood screws?
What color did you use for the room.
When do g the window trim, would it work to paint once assembled I stead of installing then painting? I just don’t want to have to take and paint carefully
Hello, I am planning on framing out the window in our master bath. I liked how you still kept the blinds. We have blinds, but at the top they aren’t that pretty. Did you do anything to yours? Was thinking about putting the top piece of wood over it to hide them, but don’t think that would look good.
Thanks for taking the time to do this! I love this window style, so my first comment is: Why cover them up with drapes? You have plenty of room inside the frames to do sheer pull down blinds and let those frames stand out!
Second comment is on technique: I would cut the pieces, pre-paint them, and then use a combination of clamps, wood glue, and a pneumatic nail gun. Much easier, faster, and less wood filler on the holes.
Great job! This is on my list of things to do as well. 🙂
Did you put an extra piece of wood to cover the top metal part of the blinds? Any advice on how to do that? Thanks!
Looks great! /G\